Roberts Radio Ecologic 3 manual Using the AC adaptor

Page 6

Using the AC adaptor

The AC adaptor for use with the Ecologic 3 should provide 7.5 volts DC output at 800mA centre pin positive.

1.Insert the adaptor plug into the DC IN socket on the left hand side of your radio.

2.Plug the adaptor into a standard 13A mains socket outlet. Whenever the adaptor is used the batteries are automatically disconnected.

The AC adaptor should be disconnected from the mains supply and the radio when not in use.

•IMPORTANT: The mains adaptor is used as the means of connecting the radio to the mains supply. The mains socket used for the radio must remain accessible during normal use. In order to disconnect the radio from the mains completely, the mains adaptor should be removed from the mains socket outlet completely.

DC 7.5V 800mA

Image 6

Contents Roberts Contents Controls Front Controls Back Battery operation Using the AC adaptor Operating your radio DAB Carefully extend the telescopic aerialSecondary services DAB Selecting a station DABDisplay modes DAB Signal strength display DAB Finding new stations DABManual Tuning DAB Autoselect DABDynamic Range Control DRC settings DAB DRCStation order setup DAB Favourite stationsAlphanumeric Active station Prune stationsOperating your radio FM Manual tuning FM Display modes FM Presetting stations Recalling a presetStereo / Mono setting FM Scan sensitivity setting FM 4,5System reset Software versionHeadphone socket Display backlightSpeciﬁcations Circuit Features GeneralGuarantee