Manual tuning - FM
1. Press the On/Off button to switch on your radio.
1
2. Press the Band button to select the FM band. Fully extend the Telescopic aerial.
3. Press and release the Select button until the display shows "Manual tune <>".
2
4.Press either of the Tuning Up or Down buttons to tune to a station. The frequency will change in steps of 50kHz.
5.When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
3
6.Set the Volume and Tone controls to the required setting.
7.To switch off your radio press the On/Off button.
4 4
15