Playing a CD
Step 1: Press the Power Button to turn the unit on.
Step 2: Load the CD disc into the unit’s CD drive.
Step 3: Adjust the Source Dial to CDG.
Step 4: Press the Play/Pause Button to play the loaded disc.
Playing a Standard CD for Karaoke
Step 1: Press the Power Button to turn the unit on.
Step 2: Load the CD disc into the unit’s CD drive.
Step 3: Adjust the Source Dial to CDG.
Step 4: Press the Play/Pause Button to play the loaded disc.
Step 5: Plug in the included microphone to the Mic 1 Connection. Adjust the On/Off Switch on the microphone to the On position.
•If feedback noise is present, move the microphone away from the unit and/or reduce the microphone’s volume.
Step 6: Adjust the Volume Dial to adjust the volume of audio output from the speakers. Adjust the Microphone Volume Dial to set the volume of a connected microphone.
Step 7: Turn the AVC Select Dial to Music or Vocal.
•In Music Mode the CD’s track vocals can not be cut out completely even if the AVC Dial is set to the maximum.
•In Vocal Mode, the CD’s karaoke track vocals can be cut out completely, the same as playing a CD+G disc.
Step 8: Use the AVC Dial to adjust the balance between the music and vocals.
Step 9: Press the Play/Pause Button to play or pause the loaded CD.
7/10/2008 2:21:42 PM