|
| SPECIFICATIONS |
|
|
|
AMPLIFIER AND SPEAKER |
| |
Power | 100W RMS @ 4 Ω | |
|
| 70W RMS @ 8 Ω |
S/N Ratio | >115dB | |
THD Power output, 20Hz to 20KHz | <0.1% | |
Internal speakers | 8 Ω | |
Tweeter type | Compression Dome | |
Midrange speaker | 5.5” | |
Woofer | 10” | |
FREQUENCY RESPONSE (Mic input to output) | ||
Line level output @ +4dBu into 600 Ω | 20Hz- 20KHz ±3dB | |
Power amp output 1 watt into 8 Ω | 20Hz- 20KHz ±3dB | |
SENSITIVITY @ LINE OUTPUT +4dBu with Master and Channels controls set to MID | ||
Mic/Line | ||
Tape in | ||
Max Input Level XLR | ||
Max Input Level 1/4” | +9dB | |
CHANNEL EQUALIZATION |
| |
Low EQ | 100Hz ±15dB | |
Hi EQ | 12KHz ±15dB | |
MASTER EQUALIZATION |
| |
Low EQ | 100Hz ±15dB | |
Mid EQ | 1.5KHz ±15dB | |
Hi EQ | 10KHz ±15dB | |
POWER REQUIREMENTS | ||
FUSING | 5x20mm glass type, 4A/250V for 115VAC, and 2A/250V for 230VAC operation, | |
DIMENSIONS (H x W x D) | 19.7” x 16.7” x 16.1” (51 x 42.5 x 41 cm) | |
WEIGHT | 53lbs. (24 Kg) | |
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.
7