iHome IP49 manual Open unit Connect to AC power Dock iPhone/iPod, Time

iP49 Quick start

1: Open unit 2: Connect to AC power 3: Dock iPhone/iPod

RESET

RESET

TEST

TEST

To open the iP49, grasp the front lid				Select the proper insert for your
		Attach AC adaptor cable to the DC		iPhone or iPod from the table below
of the unit and gently pull upwards				and place in dock. Gently place
and release into lid rest.		jack on back of the iP49 and plug the		iPhone/iPod into dock (iPhone/iPod
To close, pull lid upwards and gently		other end into a working wall socket		must not be in a “skin” or case).
press bottom edge	towards rear	to play and charge iPhone/iPod and		iPhone/iPod will	charge while
hinge.		to charge the internal battery.		docked. Press the	Button on the
				iP49 to play your iPhone/iPod.
Use this insert	iPhone 3G		iPod touch 2G	iPod nano 5G
	Insert 15		insert 16	insert	18
For this iPhone/iPod	iPhone 3G/3GS		iPod Touch 2G	iPod nano 5G

NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome toll free at 1-877-446-6301 to purchase one.

4: Time

preset iPhone iPod radio aux wake-to

•To use time sync: dock your iPhone/iPod and press the

Button. The unit will sync to the time on your iPhone/iPod.

•To set time manually: move the DST switch on rear of unit to -1 or +1 (subtracts or adds an hour for standard time or daylight saving time).

•Press & hold the Button until the hour display flashes.

Press the / buttons to set the current hour.

•Press the Button. The minute display flashes.

Press the / buttons to set the current minutes.

•Press the Button. The year flashes.

Press the / buttons to set the current year.

•Press the Button. The date flashes.

Press the / buttons to set the current date and day.

•Press the Button to confirm settings.

1