Grundig MPixx 2200, MPixx 2400 manual Power supply, Connecting to a computer, Charging the battery

CONNECTION/PREPARATION----------------------------------------------------------

Power supply

The player operates with the integrated lithium-polymer battery 1 x 3.7 V, 270 mA.

Charging the battery

Charge the battery for the player on a computer.

You can also charge the battery by connecting it to a USB-compatible hi-fi system using a USB cable.

Note:

When charging with a standard USB adapter, the player is still ready for operation.

1Connect the USB socket on the player to the USB socket on the computer,

charger or hi-fi system using the USB cable.

2Switch on the computer or hi-fi or connect the charger to the power supply.

– The display indicates the charging procedure. The charging time is approximately four hours. »P« appears in the display when the battery is fully charged.

Notes:

The display of the player tells you about the state of the battery. » Ä« in the display indicates that the battery is running low.

The playing time of the device with batteries is up to seven hours in audio mode and up to four hours in video mode.

Note:

There is a risk of explosion if the battery is not replaced properly. Only use the same type of battery or an equivalent.

Connecting to a computer

1 Switch on the computer.

2Switch off the player.

3Connect the USB socket on the player to the USB socket on the computer

using the USB cable.

– A display appears as soon as the connection is made.

ENGLISH

9