Grundig LED manual Troubleshooting, Known problems

4. Troubleshooting

Known problems:

MPAXX interrupts download. . . . . . . .Reason: This can occur as a result of a communication problem with Windows®.

	Solution: Switch the MPAXX into the download mode again.
The MultiMediaCard is not	. . . . . . . . .Reason: There are various possible causes.
being recognized although	Solution: Check whether the right interface (menu “Settings/General”)
the MPAXX	has been selected, check all connections and click the “Check Multi-
is set to “Download Wait”	MediaCard” option. As soon as the message “Online” will appear in the
and the software is active	lower left-hand window, try to download the files to the MultiMedia-
	Card again.
	If you want to use the same interface for the MPAXX and your modem
	you must start Windows anew after exchanging the plugs. Otherwise
	the MPAXX will not be recognized.

Ripping is not possible. . . . . . . . . . . . .Reason: An ASPI driver is not present or not correctly installed.

	Solution: Install an ASPI driver or obtain an up-to-date driver from the
	manufacturer of your CD ROM drive If the same problem occurs, ask
	the manufacturer if the drive does not generally support ripping.
. . . . . . . . . . .	.Reason: The audio CD is not being recognized.
	Solution: Click the “Reload CD-ROM drive” option in the Encoder
	menu. If the problem persists, check whether it is really an audio CD
	and if it is in order.
ID3 Tag	.Problem: The ID3 tag cannot be read
	Solution: The problem is either an invalid format or a new specification
	of the ID3 tag;
	At the moment there is no solution for this problem at hand.

22