Notes:
•If the disc is a normal CD the “CD” indicator appears in the display. If the disc contains compressed MP3 files the “MP3” indicator will appear in the display.
•If the disc contains compressed MP3 files the “READING” process will take longer before playback begins. Also the ESP circuit will turn ‘On’automatically.
5.) Adjust the VOLUME, EQ, and ESP controls as desired.
6.) Playback will continue until the end of the disc, then the player will stop automatically and the display will again show the total tracks and playing time on the disc. After 20 seconds the power switches ‘Off’automatically to conserve the batteries and the display goes blank. To stop playback before the disc ends press the STOP/CLEAR button at any time. Press the STOP/CLEAR button after the disc has stopped to shut the power ‘Off’completely.
PAUSE CONTROL
To pause momentarily during playback press the PLAY/PAUSE button again. The PAUSE indicator appears and the track number flashes. The sound stops but the
disc continues to spin. Press the PLAY/PAUSE |
|
button once more to cancel Pause mode and | CD |
resume normal playback. The PAUSE indicator |
|
is replaced by the PLAY indicator and the track | PAUSE |
number display stops flashing. |
|
SKIP/SEARCH CONTROLS
Press the SKIP FWD or SKIP REV buttons repeatedly during playback to skip to higher or lower numbered tracks. Playback will begin on the selected track.
To search within a track at high speed to locate a specific musical passage depress and hold either the SKIP FWD or SKIP REV controls. The player will search rapidly forward or backward as long as the buttons are depressed. The volume is automatically muted during high speed search. Watch the elapsed time display. When the time display reaches the desired point, release the buttons. Normal playback will resume at that point and the volume returns to normal level.
12
HD7288_ib070703.p65 | 12 |
7/7/2003, 10:58