PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to play in any desired order.
NOTE: You cannot program a disc during playback. If the disc is playing press the STOP/CLEAR button first to stop playback and then follow the programming steps below.
1.) While the total tracks and playing time appear on the display press the PROGRAM button once. The PROG indicator and the Program Number (P – 01) appear, and the track number (000) flashes.
STOP
2.) Press the SKIP FWD or SKIP REV button to select the first track to be programmed.
Example: Track 2.
STOP
3.) When the desired track number is flashing in |
|
the display press the PROGRAM button again |
|
to enter the desired track number in Program |
|
Number 1. The track number returns to “000” | S TOP |
| |
and the Program Number advances to “P – 02”. |
|
4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20.
5.) Press the PLAY/PAUSE button to begin programmed playback. The PROG indicator
remains in the display and the track display PLAY stops flashing. Playback begins with the first
track you programmed and continues until all programmed tracks have been played, and then the player stops. The programmed sequence will remain in the memory until the power shuts off (approximately 20 seconds) or until the CD door is opened. If you press the PLAY/PAUSE button again before the power shuts off the programmed sequence will play again.
15
HD7288_ib070703.p65 | 15 |
7/7/2003, 10:58