MP3 CD PROGRAMMED PLAYBACK
•When programming the tracks on an MP3 CD you must also select the Directory Number of the tracks being programmed.
•You can program up to 20 tracks on an MP3 CD, same as for a normal CD.
•Programming can only be done while the player is in the STOP mode. If the MP3 disc is playing, first press the STOP/CLEAR button and wait until the display shows the total Directories, Tracks, and Playing Time on the disc, then follow the programming steps below.
MP3
In this example the MP3 CD contains a total of |
|
11 Directories and 172 Tracks. | STOP |
Let’s assume that the first track we want to program is Track #3 in Directory #5.
1.) Press the PROGRAM button. The display shows Directory “01” flashing, Track “000” and Program Number “P – 01”.
PROGMP3
John Denver
2.) Press the SKIP FWD button repeatedly to select Directory #05.
PROGMP3
Lobo
3.) Press the PROGRAM button to enter Directory #05 in Program Memory P – 01.
4.) Press the SKIP FWD button repeatedly to select Track #3.
5.) Press the PROGRAM button to enter Track #3 in Program Memory P – 01. The Program Number display advances to “P – 02”, the Track Number returns to “000”.
PROGMP3
Lobo
PROGMP3
Ring
PROGMP3
Ring
6.) Repeat Steps 2 through 5 to enter up to 20 tracks in the program memory.
After you have entered up to 20 tracks in the Program Memory press the PLAY/ PAUSE button to begin programmed playback.
21
HD7288_ib070703.p65 | 21 | 7/7/2003, 10:58 |