System connections
Make sure to unplug the AC/DC adaptor before making any connections.
Connecting iPod to TV
Photo and video files from iPod can be viewed by connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT socket at the back of the unit and set the TV Out on the iPod unit to “ON” position.
VIDEO OUT
Video cable | TV |
(not supplied) |
|
To video input socket
Watching videos on a TV connected to iPod
1Enter the iPod menu.
Press the ESOUND
2Select the desired video from the iPod unit.
3Press the 
button on the iPod unit to start playback.
For iPod touch, playback will automatically start once the desired video is selected.
Notes:
zIf the TV Out setting is already turned ON at video menu, the video is automatically displayed on the TV screen when iPod starts playback.
zTo return to watching video on iPod screen, repeat steps 1 to 3.
zDuring iPod video playback, pressing the ESOUND
zPlease make sure to set iPod unit to either NTSC or PAL to match your TV signal. Please visit Apple’s home page for further information.
zCustomer should also refer iPod operation manual before making video out setting.
Using with the AC/DC adaptor
1Plug the AC/DC adaptor cable into the DC IN socket on the unit.
2Plug the AC/DC adaptor into a wall socket.
AC/DC
Adaptor
Cable
DC IN socket (DC 6V)
Wall Socket
(AC 100 - 240 V, 50/60 Hz)
Notes:
zUnplug the AC/DC adaptor from the wall socket if the unit will not be used for a prolonged period of time.
zConnecting the AC/DC adaptor to the unit disconnects the batteries.
zUse only the supplied AC/DC adaptor. Using other AC/DC adaptor may cause an electric shock or fire.
ENGLISH