Sharp XL-HF401PH operation manual Advanced USB playback Listening to the radio, Tuning

Page 27

Advanced USB playback

Listening to the radio

 

 

 

The following functions are the same as CD operations:

Page Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Programmed play (MP3/WMA) . . . . . . . . . . . . . . . . . .13

Note:

If USB memory device is not connected, “USB No Media” will be shown on the display.

Notes:

This unit only supports “MPEG-1 Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz)

Playback order for MP3 files may differ depending on the writing software used during file download.

Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps.

For MP3/WMA files, please put “.MP3” “.WMA” extension. Files cannot be played back if there is no MP3/WMA extension.

Playlists are not supported on this unit.

This unit can display Folder Name or File Name up to 32 characters.

Maximum total number of MP3/WMA files is 65025.

Total number of folders read is 999 including folder with non-playable file. However, the display shows only folder with MP3 files.

The display playback time may not be displayed correctly when playing back a variable bitrate file.

The ID3TAG information supported are TITLE, ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the CD/USB DISPLAY button during file playback or pause mode.

WMA meta tag also supports title, artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back.

CD/USB

RDS

Tuning

1Press the ON/STAND-BY button to turn the power on.

2Press the TUNER button repeatedly to select FM Stereo or FM Mono.

3Press the TUNING ( or ) button on the remote control to tune in to the desired station.

Manual tuning:

Press the TUNING ( or ) button repeatedly to tune in to the desired station.

Auto tuning:

When the TUNING ( or ) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.

Notes:

When radio interference occurs, auto scan tuning may stop automatically at that point.

Auto scan tuning will skip weak signal stations.

To stop the auto tuning, press the TUNING ( or ) button again.

When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light up. Finally, the station name will appear.

Full auto tuning can be achieved for RDS stations “ASPM”, see page 18.

To receive an FM stereo transmission:

Press the TUNER button to select stereo mode and “ST” indicator will be displayed. “ ” and “ ” will appear when an FM broadcast is in stereo.

If the FM reception is weak, press the TUNER button to extinguish the “ST” indicator. The reception changes to monaural, and the sound becomes clearer.

E-16

Image 27
Contents XL-HF401PH Dichiarazione di conformità Ostrzeżenie Attenzione VorsichtAdvertencia VarningVorsicht Observera Page Der Europäischen Union Entsorgungsinformationen Información sobre la eliminaciónTietoja laitteen hävittämisestä Informação sobre Eliminação de ProdutosInformation on Proper Disposal Informatie over verantwoorde verwijderingSveitsi Käytetyt paristot/akut palautetaan ostopaikkaan Accessories IntroductionSpecial Note General PrecautionsControls and indicators Volume controlRemote control DisplaySpeaker system System connections Subwoofer pre-out connection System connections Remote controlLine input connection TV, etc Battery installation Test of the remote controlGeneral control Setting the clock Remote control onlyWi-Fi network Setup for AirPlay / Dlna Connection via wireless router with WPSDirect wireless connection Connection of an AirPlay device to the same Wi-Fi network To check the IP address of the router / Mac ID / Ssid Network Stand-by modeListening to the iPod, iPhone or iPad IPhone playbackTo remove adaptor for iPod or iPhone IPod and iPhone connection Dock onlyTo insert adaptor for iPod or iPhone IPod or iPhone playbackDisc playback Listening to a CD or MP3/WMA discNavigating the iPod, iPhone or iPad menus Various iPod, iPhone and iPad functionsVarious disc functions Direct track searchRepeat play Random play shuffle Programmed play CDProgrammed play MP3/WMA MP3/WMA folder mode only for MP3/WMA files Procedure to playback MP3/WMA disc with folder mode onAbout folder playback order To play back USB/MP3 player with folder mode off Listening to USB mass storage device/MP3 playerTo remove USB memory device Advanced USB playback Listening to the radio TuningUsing the Radio Data System RDS To stop the Aspm operation before it is complete Using the Auto Station Programme Memory AspmTo recall stations in memory To specify programmed types and select stations PTY searchNews Indicator. Daily timer Timer and sleep operation Remote control onlyTimer playback Timer playbackTo use timer and sleep operation together Enhancing your systemSleep operation CD player Troubleshooting chartHeadphones IPod, iPhone or iPadNetwork reset Wi-Fi connectionIf problem occurs Factory reset, clearing all memorySpecifications MaintenanceTINSZB223AWZZPV Down

XL-HF401PH specifications

The Sharp XL-HF401PH is a compact, high-performance audio system designed to deliver an exceptional listening experience. This all-in-one unit seamlessly integrates modern technologies while maintaining a stylish and sleek appearance, making it an ideal addition to any room.

One of the standout features of the XL-HF401PH is its powerful audio output. With a total system power of 40 watts, the system is engineered to fill any space with crisp, clear sound. The dual speaker configuration supports a wide frequency range, ensuring that both bass-heavy tracks and vocal performances are rendered with impressive clarity. The high-quality speakers are designed to minimize distortion, resulting in an authentic audio experience.

Equipped with advanced Bluetooth technology, the Sharp XL-HF401PH allows users to effortlessly stream music from their smartphones, tablets, or other compatible devices. This wireless functionality enhances convenience, enabling users to enjoy their favorite tunes without the hassle of cords and cables. In addition to Bluetooth, the system features a USB port for playing digital music files directly from flash drives, as well as a built-in CD player for those who still appreciate the charm of physical media.

For added versatility, the system boasts an FM radio tuner, offering access to a wide range of broadcast stations. The easy-to-navigate LCD display ensures that tuning into live radio is a straightforward process, making it easy for users to enjoy their favorite shows and music channels.

The Sharp XL-HF401PH is designed with user-friendliness in mind. Its intuitive remote control allows for easy navigation and control over various functions, including volume, track selection, and radio tuning. The system also comes with preset equalizer options, enabling users to customize the sound profile according to their personal preferences.

The build quality of the XL-HF401PH is notable, with a sleek and modern design that fits well in any environment, be it a living room, bedroom, or office space. Its compact size makes it easy to place on shelves or tables without overwhelming the decor.

In summary, the Sharp XL-HF401PH is a feature-rich audio system that combines modern connectivity with high-quality sound. With its Bluetooth capability, diverse media playback options, and user-friendly interface, it stands out as an excellent choice for music enthusiasts looking for a compact yet powerful solution.