Philips SB2000 user manual Get started, Charge the built-in battery, Power on/off

3 Get started

Always follow the instructions in this chapter in sequence.

Charge the built-in battery

The speaker is powered by a built-in rechargeable battery.

Note

•• Before use, fully charge the built-in battery.

5V A

Power on/off

Press to power it on or off.

Note

•• If the USB cable is connected to the micro USB socket, this product does not automatically power off.To save battery power, disconnect the USB cable or manually power off the product after use.

•• In Bluetooth mode, if there is no Bluetooth connection or no audio is streamed to this product within 15 minutes, this product automatically powers off.

Use the auto sensor

An auto sensor is integrated in this product. You can adjust the direction of this product to power it off easily.

1 Open the protective lid.

2 Connect the USB cable between

•the micro USB socket on the speaker, and

•a USB socket on your computer. Battery indicator

The LED indicator beside the button indicates the battery status.

Indicator	Battery
Solid red	Under charging
Off	Fully charged

OFF ON

ON OFF ON

1 Switch the slider to ON to enable the auto sensor.

4EN