Philips SB2000 user manual Play audio via Bluetooth, Make a call, Clear the pairing history

Page 9

Play audio via Bluetooth

Note

•• If the connected Bluetooth device supports the Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the device through the system.

•• If the device also supports the Audio Video Remote Control Profile (AVRCP), you can control play on this product.

•• If the connected device does not support the AVRCP, control play on the connected device.

•• If there is an incoming call on the connected mobile phone, music play pauses.

Buttons Functions

Start, pause, or resume play.

/ Increase or decrease the speaker volume.

Make a call

Buttons Functions

Press to answer an incoming call.

Press to end the current call.

Press and hold to reject an incoming call.

Press twice to dial the last called number.

Press twice to hold on the current call and answer another incoming call.

/ Increase or decrease the speaker volume.

Clear the pairing history

When the product is powered off, press and hold for 8 seconds.

EN 7

Image 9
Contents Register your product and get support at Always there to help youPage Contents Page Introduction Whats in the boxMake phone calls Charge the built-in battery Power on/offGet started Page If a password is required, enter 0000 and then confirm Bluetooth indicatorConnect a device Play audio via Bluetooth Clear the pairing historyMake a call Listen to an external device Press Adjust volumeProduct information BluetoothGeneral information AmplifierAbout Bluetooth device TroubleshootingGeneral No response from the speaker Restart the speakerCare of the environment ComplianceTrademark notice Environmental informationWoox Innovations Limited. All rights reserved Copyright