Electro-Voice Zx1i-100T Select the horn dispersion orientation- If necessary, Enclosure

Page 7

Step 3: Select the horn dispersion orientation– If necessary

For the 90° x 50° horn version you may elect to rotate the horn assembly for more effective coverage depending on the orientation of the speaker cabinet in your installation. The horn is factory-installed with the 90° coverage in the horizontal plane and the 50° coverage in the vertical plane as shown in Figure 8 below.

To rotate the horn follow the steps below:

1.Remove the logo badge to expose grille mounting screws.

2.Remove the grille assembly – see illustration

3.Remove the screws holding the horn assembly in place. – see illustration

4.Rotate the horn assembly 90°.

5.Secure the horn assembly back to the baffle with the horn mounting screws.

6.Secure the grille assembly to the baffle with grille mounting screws.

7.Secure the logo badge back onto the grille.

90° x 50°

Horn

Horn Mount

Screws

Grille

Assembly

Logo Badge

Grille Mount

Screws

Figure 8: Horn Rotation (90° x 50° Models Only)

Electro-Voice®Zx1i Owner’s Manual

Enclosure

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Zx1i Series Loudspeaker Table of Contents Zx1i-100T Model SummaryZx1i-90 Zx1i-100QuickSAM Strong-Arm-Mount System Product Feature IdentificationMount the SAM Bracket to Mounting Surface Step-by-Step Installation and WiringVoltage Tap Selector Detail Select Voltage Tap Zx1i-100T model onlyEnclosure Select the horn dispersion orientation- If necessaryAttach the Speaker to the QuickSAM Bracket Attaching Speaker to QuickSAMTM AssemblySecure the Seismic Tab Connection Point Wire the SpeakerConnector MaintenancePress Here Detaching the speaker from the QuickSAM BracketPainting the Grille Painting ProcessAll Locations Fax Telex Communications, Inc
Top Page Image Contents