Dividing a recording track
When recording from tape, radio, music port or AUX source, you can divide tracks with:
•AUTO 5M: A track is automatically divided at
•MANUAL: Press [OK] during recording to add a track mark. If you do not add a track mark manually, a track mark is added automatically at
1 Select the source you want to record.
2 Press [SETUP].
“TRDIVIDE” is shown.
3
4 Press [OK] to add a track mark during recording.
Add a track mark at the end of each track during cassette tape recording.
Skip unwanted noise by making a new track.
Note:
When you press [OK] while you record in the AUTO 5M mode, the
Recording MP3 contents
You can record MP3 contents from a data disc.
1
2
3 Press [R/T] to select the group and press [OK]. Do this step again if there are subgroups.
4 Press [7, USB] to start recording. Recording starts from the first content.
Recording progress in percentage of all contents in the group
. ./Audio/mp3
Hakkushon
LevelUp
Mata Sazae
Sazae***
Hakkushon | Content currently |
| being recorded |
Deleting the contents
1 Press [4, USB] and then press [8] two times.
2 Press [R/T] to select the group.
Press [OK] and then press [R/T] to select a content.
3 Press [DEL].
AUX002
Is it OK to delete?
Yes No
4 Press [Y/U] to select “Yes” or “No” and press [OK]. Select “Yes” to delete a content. “DELETING” blinks on the display panel.
Note:
•“USB WRITE PROTECTED” is shown if the USB mass storage device is locked.
•You cannot delete groups that have subgroups or unsupported contents.
ENGLISH
OTHER OPERATIONS
Stop recording | Press [8]. |
| Recording stops at the last fully recorded |
| content in the group. |
| Example: If you stop recording during the |
| fourth content, only the first three |
| contents are recorded. “NO FILE |
| RECORDED” is shown if no |
| content is recorded. |
Delete a | (Z right, “Deleting the contents”) |
recorded |
|
content |
|
Note:
•Some contents can use a longer time to record.
•Some MP3 contents cannot be recorded because of the condition of the disc.
RQTX1215
15
15