ENGLISH
Picture |
| Page |
Auto zoom function does not | • Switch off the zoom function of the TV. | – |
operate correctly. | • Use the other preset aspect ratios or manual adjustment. | 20 |
| • Zoom function does not work well especially in dark scenes or does not work at all due to | – |
| the type of disc. |
|
When playing PAL disc, picture is | • Set “TRANSFER MODE” in Menu 2 to “AUTO”. | 13 |
distorted. |
|
|
REFERENCES
Progressive video |
| Page |
There is a ghosting effect when the | • Set “VIDEO OUT (I/P)” in “VIDEO” menu to “INTERLACE”. | 20 |
progressive output is on. |
|
|
Picture not in progressive output. | • Set “VIDEO OUT (I/P)” in “VIDEO” menu to “PROGRESSIVE”. | 20 |
| • If you connect the system to the TV through the VIDEO OUT terminal, output will be | – |
| interlace, even if “PRG” is shown. |
|
Radio |
| Page |
Distorted sound or noise is heard. | • Adjust the position of the FM or AM antenna. | 6, 7 |
“ST” flickers or does not show. | • Press [PLAY MODE] to select “MONO”. | 16 |
A beat sound is heard. | • Switch off the TV or move it away from the system. | – |
|
|
|
A low hum is heard during AM | • Move the antenna away from other cables and cords. | – |
broadcasts. | • Set to “BP 1” or “BP 2”. | 16 |
USB |
| Page |
The USB mass storage device or | • The format of the USB mass storage device or the contents in it is/are not compatible | 14 |
the contents in it cannot be read. | with the system. |
|
| • USB mass storage devices with storage capacity of more than 32 GB cannot work in | – |
| some conditions. |
|
Slow operation of the USB mass | • Large content size or large memory USB mass storage device takes longer time to read | – |
storage device. | and show on the TV. |
|
USB recording stops suddenly | • Error occurred during USB recording. Disconnect the USB mass storage device and then | 14 |
“REC ERROR”. | connect again. |
|
Cassette tape |
| Page |
Unsatisfactory sound quality. | • Clean the heads. | Below |
Recording is not possible. | • If the erasure prevention tabs have been removed, put adhesive tape across the holes. | 16 |
|
|
|
The tape is stuck. | • Close the cassette tape deck. Switch off the system and then switch it on again. Press | 16 |
Cannot eject the cassette tape. | [8/x, STOP/EJECT] again. |
|
Memory reset (Initialisation)
When these situations occur, refer to the instructions below to reset the memory:
•There is no response when buttons are pressed.
•You want to clear and reset the memory contents.
To reset memory
1.Disconnect the AC mains lead. (Wait 3 minutes before you continue with step 2.)
2.While you press and hold [1] on the main unit, connect the AC mains lead again. “- - - - - - -
3.Release [1].
All the settings are set back to the factory preset. It is necessary to set the memory items again.
RQTX1215
26
Maintenance
To clean this system, wipe with a soft, dry cloth.
•Never use alcohol, paint thinner or benzine to clean this system.
•Before using chemically treated cloth, read the instructions that came with the cloth carefully.
For a good quality sound (cassette tape deck)
Clean the heads regularly to make sure that you get good quality playback and recording. Use a cleaning tape (not included).
26