Stanton C.501 user manual Scanning Fast forward/Fast backward, Time display, Fader start

Page 10

OPERATIONS

9. Scanning (Fast forward/Fast backward)

Scanning is a function for moving quickly forward or backward when the

or

button is pressed.

The scanning speed depends on how long you hold the button.

 

 

Press and hold the

or

to begin scanning. The disc moves rapidly forward or backward and the sound is

output. The current scan point is indicated on the LCD.

 

 

 

Press and hold the

to scan in the forward scanning,

to scan in the reverse scanning.

10. Time display

Press TIME button to select time display mode:

Elapsed time of a track.

Remaining time of a track.

ELAPSED

REMAIN

TIME

TIME

Figure 10-1

11. Matching the Beats Per Minute (BPM)

There are two tools available for matching the BPM of the two CDs:

Use the pitch slider to adjust the BPM statically.

Use the PITCH BEND buttons to change the BPM temporarily.

1)Pitch Slider

To adjust the BPM by sliding the pitch slider up or down, press the PITCH button to turn on the PITCH adjustment function before use.

Slide the pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is +/-10%.

2)Pitch Bending

The BPM increases or decreases respectively while the PITCH BEND+ or PITCH BEND- button is pressed.

The BPM increase depends on how long you hold the button. If you hold the button for about 1/2 second, theBPM will go either to +16% for PITCH BEND+ or -16% for PITCH BEND-. If you tap the button, the BPM will only change a little so you can change the beat slightly without audible changes in the music.

The CD will return to the tempo indicated by the Pitch slider when you let go to the PITCH BEND+ or -.

Figure 11-1 shows an example of how to use the pitch bend function. In this example, both players are playing and the BPM has already been matched with the pitch sliders.

CD1 bass beat

CD2

bass beat

The bass beats also match

Bass beat

 

PITCH BEND

Bass beat

Figure 11-1

12. Fader start

You have the possibility to start the respective CD-player directly from the mixer. Make sure that the Control socket is connected with the respective socket on the mixer. Additionally, the Audio out socket have to be connected with the Line-input sockets of your mixer. Please note that the Fader start function only works with the appropriate mixers. Insert the CD and select the desired track. Start playback from your mixer.

9

Image 10
Contents Page Refer Servicing to Qualified Service Personnel Important to Safety‧ Line Voltage Selection for multiple voltage model only Safety Instructions Main Features Remote Control Connector2TIME 17PITCH Range 18CONTROL Connector 19FADER Start SocketsControl Unit Pitch DisplayMain Unit Front Panel PreparationsNames and Functions Audio OUTControl Unit Operations Pausing CueingMatching the Beats Per Minute BPM Scanning Fast forward/Fast backwardTime display Fader startRelay PossibilitySpecifications Before Switching OFF the PowerCompact Discs Warranty T a l o n g d o t t e d l i n e Place Stamp Here