PREPARATIONS
1.Checking the Contents
Check that the carton contains the following items:
1)Main unit
2)Control unit
3)Operating instructions (this booklet)
4)Pair of RCA pin cord.
5)Control cords (1 meter)
2.Installing the Unit
Mount the unit onto your console or rack with 19" EIA rack rails.
CAUTION:
The player will work normally when the main unit is mounted with the front panel at within 15 degrees of the vertical plane. If the unit is tilted excessively, discs may not be loaded or unloaded properly.
(Figure 1)
The control panel's LCDs are designed to be clearly visible within the angles shown in Figure 2. Mount the control unit so that the visual angle is within this range.
Max.
15°
45°
5°
Main unit | Control | |
panel Button | ||
| ||
Figure 1 | Figure 2 |
. Connections
1)Turn off the POWER switch.
2)Connect the RCA pin cord to the input on your mixer.
3)Connect the control cords to the REMOTE connector on the main unit.
CAUTION:
•Be sure to use the supplied control cords. Using another type of cable may result in damage.
•Be sure the power is off when connecting the control cords. Otherwise the units may not work properly.
NAMES AND FUNCTIONS
Main Unit Front Panel
(1)POWER (Power ON/OFF Switch)
When the POWER switch is pressed, the power turns on.
(2)DISC HOLDER
Place the discs in the holder. Press the OPEN/CLOSE button to open and close the disc holder.
(3)OP/CL
Press it to open and close the disc holder. The control unit also includes OPEN/CLOSE button. The disc holder cannot be opened during playback, so stop playback before pressing the button.
(4)REMOTE CONTROL CONNECTOR
Connect this connector to the control unit using the included control cord.
(5)AUDIO OUT
The audio signals from each player are output from these jacks.
(6)DIGITAL OUT SOCKET
The
5