Installing batteries

1.position the radio face down.

2.Press the catch and slide in the direction of the arrow.

3.Lift up the battery cover.

4.Insert 2xUM-3 (AA) size batteries. Make sure the batteries are positioned in accordance with the diagram indicated.

5.Replace the battery cover.

Battery replacement

The battery indicator will appear and flash in the display when the batteries are in need

of replacement. After removing the batteries, you have approximately 3 minutes to replace the batteries after which clock and memory information will be lost.

Setting the clock time

The clock will start running when the batteries

are installed. When the batteries are installed for the first time, the display will show 0:00.

Note:

Time can only be set with the radio switched off.

1.Ensure that the radio is switched off.

2.Press and hold down the Time Set button for more than 2 seconds until the hours digit begins to flash in the display.

3.Whilst the hours digit is flashing, adjust the hours using Tuning Up/Down buttons.

4.Press the Time Set button, the minute digit begins to flash in the display.

5.Whilst the minute digit is flashing, adjust the minutes using the Tuning Up/Down buttons.

6.Press the Time Set button to complete time setting.