Sangean Electronics DT-220A manual Presetting stations, Recalling a preset station, Display modes

Presetting stations

You may store up to 10 stations each on FM, AM (MW) bands giving a total of 20 preset stations.

1.Tune into the required stations using one of the tuning methods previously described.

2.To store the station, press and hold down one of the PRESET button 1-5 for more than 2 seconds until display shows preset location.

3.To store the station into preset 6-10, press +5 button, display will show +5, then press and hold down one of the PRESET button 1-5 for more than 2 seconds until display shows preset location.

Recalling a preset station

1.Switch on your radio using the Power button.

2.Select the desired waveband using the Band button.

3.Simply press one of Preset buttons 1-5 to recall the required preset stations. To recall preset stations 6-10, press +5 button, then the Preset button 1-5.

Display modes

Whilst radio is switched on, press Display button to change between frequency and normal time.

8