Simple Setup
step1
Assembling the front speakers
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a
≥There is no difference between the right and left speakers and stands.
≥For optional wall mount, refer to page 6.
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers | 2 Stands (with cable) | 2 Bases | 8 Screws |
Assembling the front speakers
Slide into the groove.
Tighten securely. |
| Insert the wire fully. |
| i: White |
| j: Blue |
| Push ! |
Position the cable |
|
between the ridges. | Press into the groove. |
| Tighten securely. |
Leave about 80 mm (35/16z)
Speaker assembly option
Thread the speaker cable through | Attach the speaker. |
the base. |
|
Leave about 100 mm (315/16z)
You can remove and use the cable from the stand. To reattach the cable, refer to page 6.
Insert the wire fully. i: White
j: Blue
Push !
Press into the groove. 
Tighten securely.
∫Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
RQTX0064
String (not included)
Thread from the wall to the speaker and tie tightly.
| Approx. |
Screw eye | 150 mm |
(not included) | Wall |
(529/32z) |
Rear of the speaker
4