Troubleshooting guide
HDMI or progressive video
Troubleshooting guide
There is ghosting when HDMI or | ≥This problem is caused by the editing method or material used on |
|
progressive output is on. | corrected if you use interlaced output. |
|
| – When using the COMPONENT VIDEO OUT terminal, set “Video Output Mode” in Picture Menu to | 23 |
| “480i”. (Alternatively, press and hold [CANCEL] to switch to “480i”.) |
|
| – When using the HDMI AV OUT terminal, set “Video Output Mode” in Picture Menu to “480i” output | 23, |
| marked with an “¢”. Or, disable the HDMI AV OUT connection and use other video connections. | 26 |
| Make the settings in the following order: |
|
| 1 Set “Video Mode” in the “HDMI” menu to “Off”. |
|
| 2 Set “Video Output Mode” in Picture Menu to “480i”. (Alternatively, press and hold [CANCEL] to |
|
| switch to “480i”.) |
|
|
|
|
Pictures not in progressive | ≥Select “480p” in “Video Output Mode” in Picture Menu. | 23 |
output. | ≥The unit’s VIDEO OUT terminal outputs the interlaced signal even if “PRG” is displayed. | 7 |
|
|
|
Closed captions not displayed. | ≥When HDMI or progressive output is on, closed captions will not be displayed. | — |
|
|
|
Radio
Distorted sound or noise is heard. | ≥Adjust the position of the FM or AM antenna. | — |
“ST” flickers or does not light. | ≥Use an outdoor antenna. | 9 |
|
|
|
A beat sound is heard. | ≥Turn the television off or move it away from the unit. | — |
|
|
|
A low hum is heard during AM | ≥Separate the antenna from other cables. | — |
broadcasts. |
|
|
|
|
|
Wireless equipment
No sound. | ≥Ensure that the digital transmitter is fully inserted into the slot of the main unit. | 9 |
| ≥Ensure that the wireless equipment is plugged into the AC outlet and is turned on. Then, check that | 10, 13 |
| “ [W1] ” [and “ [WS] ” ([PT1050])] is displayed on the main unit’s display. |
|
|
|
|
The indicator on the wireless | ≥There is a power supply problem. Consult the dealer. | — |
equipment keeps flashing |
|
|
between red and green. |
|
|
|
|
|
Television displays
“/” | ≥The operation is prohibited by the unit or disc. | — |
|
|
|
“Cannot display group xx, content xx” | ≥You are trying to display incompatible contents. | — |
|
|
|
“This disc may not be played in | ≥Only | Cover |
your region” | unit can be played. | page |
|
|
|
No | ≥Select “On” in | 26 |
|
|
|
Main unit’s screen saver remains | ≥When using the HDMI connection, audio/video information is continually transferred between the | — |
| main unit and the television regardless of which source has been selected on the main unit. This is |
|
| normal. |
|
|
|
|
RQTX0064
38