Battery, Charging | SanDisk Clip-UM608-ENG specs

1	Shuffle	Indicate that the Shuffle function is enabled
2	Repeat	Indicate that the Repeat function is enabled
3	Current/Total Tracks	Display the current track number and the total number of
		tracks
4	Battery Indicator	Display the battery status
5	Artist Name	Display the artist name
6	Title/Album	Display the song title and album name
7	Play Time	Display the elapsed time
8	Progress Bar	Display the progress of the current track
9	Play/Pause	Display the music or recording files playback status

Battery

The Sansa® Clip player comes with an internal rechargeable battery. To use the player for

the very first time, remember to fully charge the battery. You can charge your Sansa® player through the USB port of your computer, a car adapter (not included) USB port, or AC adapter (not included) USB port.

Charging

To charge the battery, please follow these steps:

1.Connect the larger end of the USB cable into an available USB port on the computer.

2.Connect the smaller end of the USB cable into the Sansa® Clip player.

3.The computer must be on for most USB ports to charge your battery. Your Sansa® will show connected and the yellow charging indicator will appear. The battery level indicator will blink while charging. You will not be able to play while connected to the computer USB.

4.To stop recharging, simply disconnect the cable.

The battery can also be charged using an AC adapter (not included) or a car adapter (not included) and you will be able to play your device while charging with one of the adapters.

NOTE: Some low-power USB ports may not be able to provide enough charge power. Also note that the rechargeable batteries are not replaceable.

Sansa® Clip Overview	6