Shiro 1.3 manual Setting A-B Clipping, Firmware Upgrade, Connecting Player to Computer

Page 9

Setting A-B Clipping

1.While the music or audio file is playing, press A-Bonce to set the start point A.

2.Press A-Bagain to start repeating the repeated portion continuously.

3.While repeating A-B portion, you can press A-Bor Left/Right exit this mode.

Firmware Upgrade

1.Click on Start > Programs > Sigmatel MSCN > Firmware Download. You must ensure the player has been connected to the computer USB port.

2.You may download the firmware file from www.shirocorp.com or Installation CD.

3.Click Start to start upgrading.

4.Once upgrading has been done successfully, the utility will display the message.

Connecting Player to Computer

1.Connect the USB port of the player to the computer using the USB cable provided.

2.Please take note if you are using Windows® 98 Second Edition, YOU MUST INSTALL THE DRIVER PROVIDED IN THE INSTALLATION CD-ROM. For user using Windows® Millenium/2000/XP, your computer will install the driver automatically.

3.You will be able to locate the player under My Computer > Removable Disk. There are 2 removable disks, one is the internal memory and the other is SD/MMC.

4.Double-click on it to open. You can drag and drop your music files here.

Troubleshooting Guide

1. I press Play/Pause but there is no reaction from the player. It will not power up.

8

Image 9
Contents SX MP3 Digital Audio Player USB Table of Contents Power On & Off Operation ButtonsPackage Includes LCD Information Minimum System RequirementsMenu Functions Music Operation Recording SettingVoice Operation Playing Recorded FilePress Menu to enter Rec Setting Menu Adjusting and Saving FrequencyFM Operation Setting Equalizer Setting Repeat ModeDeleting File Firmware Upgrade Setting A-B ClippingConnecting Player to Computer Troubleshooting GuideMP3, PCM WAV USB Technical SpecificationsLimitation of Liability and Damages