3.Install the batteries in the holder as indicated by the polarity sym- bols (+ and
ATTACHING THE
ANTENNA
You can attach the supplied tele- scoping antenna to the supplied magnetic base or directly to the CB. In either case, fully extend the anten- na for maximum range.
4.Slide the battery pack’s case over the holder until it snaps into place.
Note: The case slides over the holder in only one direction. If it doesn’t slide into place on the first try, do not force it! Turn the case over and try again.
5.From the right side of the CB, slide the battery pack onto the bottom of the CB until it clicks into place.
To test the batteries, press BATT TEST on the battery pack. If the indi- cator lights, the batteries are still good. If the indicator does not light, replace all eight batteries.
6
Attaching the Antenna Directly to the CB
To attach the antenna directly to the CB, simply screw the antenna into the CB’s ROD ANT jack.