Basic Operation
Basic Operation
Set the Clock
1.If necessary, press CLOCK to switch to clock mode.
2.Briefly hold CLOCK until the hour digits flash.
3.Use ,,, to set the hour, minute and AM/PM.
4.After setting clock , press CLOCK or SELECT to confirm and exit.
Set the Alarm
1.Slide ALARM 1 or ALARM 2 to SET.
2.Press ,,, to set the alarm hour, minute, and alarm source (buzzer loudness 
/
/
or FM / AM).
3.After setting the alarm, slide ALARM 1 or ALARM 2 to ON/OFF to confirm and exit.
4.To turn the alarm on, slide ALARM 1 / ALARM 2 to ON. To turn it off, slide ALARM 1 / ALARM 2 to OFF.
When the Alarm Sounds
•The alarm will sound for 2 hours at the set time.
•To pause the alarm for 15 minutes, press SNOOZE.
•When the alarm time expires, the alarm will sound again the next day at the same time.
nNote: The radio automatically exits setting mode if you do not press any button for 15 seconds while setting the alarm or clock.
Using the Radio
Press AM or FM to enter radio mode.
Manual Scan – Press or to find a station.
Auto Scan – Briefly hold or until the channels start to change rapidly. The radio automatically stops when it finds a station. If no station is found, the radio will continue scanning.