Radio Shack 21-1679 manual Using Vehicle Power

Powering Your CB Radio

•Always connect the power supply to the CB radio before you connect it to an AC outlet, and disconnect the power supply from the AC outlet before you disconnect it from the CB radio.

Using Vehicle Power

To power your CB radio from your vehicle, you will need a DC power cord (not included). You may also need a roof-mounted antenna to improve transmission quality and increase the transmission range.

1.Turn off the CB radio if it is on.

2.Use the DC power cord to connect the CB’s 12V DC PWR jack and the vehicle’s 12V power source, such as the cigarette-lighter socket.

3.Turn on the CB radio to use.

#AUTIONS

•You must use a Class 2 power supply that provides regulated 12V DC and delivers at least 2.5A. The barrel plug’s center

MUST
BE
POSITIVE
AND
THE
BARREL
PLUG
MUST
ÞT
THE
#"
RADIOmS

12V DC PWR jack. Using an adapter that does not meet

THESE
SPECIÞCATIONS
COULD
DAMAGE
THE
#"
RADIO
OR
ADAPTER

•Always connect the power supply to the CB radio before you connect it to the vehicle outlet, and disconnect the power supply from the outlet before you disconnect it from the CB radio.

7