Quickstart
18 ProHD DR-HD100 Portable DTE Recorder
Powering the DR-HD100• The DR-HD100 operation without a battery installed.
To operate the DR-HD100 without a battery installed,
connect the unit to an AC power source.
• Before operating the DR-HD100 with battery power.
It is first necessary to fully charge the battery. An uncharged
battery, typically takes 2-3 hours to charge.
Connecting the DR-HD100 to AC Power
Attach the AC power cord to the DR-HD100 (with or without battery
installed). The DR-HD100 is immediately ready for operation.
To do this, connect the AC power as follows:
Step 1: Plug the cord from the power supply into the bottom of the
DR-HD100.
Step 2: Connect the line cord to the rectangular power supply.
Step 3: Plug the line cord into an electric outlet.
Battery Pack
DC Power Port
DC Cable