DR-HD100: Using with a Computer
ProHD DR-HD100 Portable DTE Recorder 43
Dismounting the DR-HD100 (Windows)
When finished working with the DR-HD100 and the computer, it is
necessary to dismount DR-HD100 from the system
To do dismount the DR-HD100:
Step 1: Click the Safely Remove Hardware icon at the bottom right side
of the Windows task bar as shown below.
Step 2: Next, the computer system prompts to remove the connected
DR-HD100. This begins the dismount process.
Step 3: Select the message and click on it.
The computer dismounts the DR-HD100 and then displays a
message that it is now safe to remove the unit.
Dismount DR-HD100 Before Powering Off
It is important to dismount the DR-HD100 from the Windows
system BEFORE powering down the unit.
Unplug or Eject Hardware Icon
(Safely Remove Hardware)