FOCUS Enhancements DR-HD100 manual Do Not Use AV/C control in Record Mode

DR-HD100 Functions

• Use the Keeper key to cycle through the available Reels. For example, if the current Reel selection is 3. pressing Keeper changes the selection to Reel 4.

To purchase the wired remote control, p/n ACSS-0019-01, for the DR-HD100, visit Focus Enhancements web site at www.focusinfo.com/sales/store/.

•JVC GY-HD

The JVC GY-HD control setting is the preferred mode when using the companion GY-HD100/101 camcorder. See page 30 for more information about using the JVC GY-HD control mode.

•Syncro Slave

Use this mode when the camcorder does not have DR-HD100 compatible external control or the tapeless trigger functionality. In Syncro Slave control mode, the DR-HD100 mimics the camcorder’s operations by monitoring the camcorder’s tape record state.

•AV/C

Do Not Use AV/C control in Record Mode

Use AV/C in playback mode and other situations where the DR-HD100 is controlled by an external FireWire device such as a NLE system that is not supported by Direct To Edit Technology. In these cases, the DR-HD100 can be used in a manner similar to a camcorder to capture footage to the NLE

•External

The External Control mode allows the DR-HD100 to be controlled from a camcorder other than the JVC GY-HD100/ 101, if it features a DR-HD100 compatible external control setting separate from the tape transport.

Camcorder Requirements for External Control Mode

External Control mode will not work unless it is supported by the camcorder and the camcorder is placed in this external control mode. Please check your camcorder manual for more details.

90 ProHD DR-HD100 Portable DTE Recorder