FOCUS Enhancements DR-HD100 manual Initial Setup, For More Information

DR-HD100: Using with a Computer

To move video files from the DR-HD100 to a computer:

•Connect the DR-HD100’s Computer I/O 1394 port directly to a computer with an active OHCI compliant IEEE-1394 FireWire port and the necessary FireWire disk drive drivers.

For More Information

Go to the FOCUS Enhancements' website (www.focusinfo.com) for more compatibility information.

•Use the DR-HD100 HDD Bypass mode, refer below for more information.

The DR-HD100 is compatible with any computer system that can read FAT 32 volumes, such as Windows 98SE/ME/2000/XP and Mac OS9/OS10.

Initial Setup

Step 1: Enter HDD mode and enable DD Drive.

This step is required before mounting the DR-HD100 to a computer.

•On the DR-HD100 go to the HDD screen.

•Select DD Drive and Right arrow to Connect screen.

•Press Enable function button.

Refer to the section, “HDD Mode Screen” on page 57

Step 2: Connect the DR-HD100 through its COMPUTER I/O 1394 port to the computer system using a standard 6-pin to 6-pin FireWire cable.

Step 3: Connect power to the drive if necessary.

Step 4: Consult the computer’s documentation for more information.

36 ProHD DR-HD100 Portable DTE Recorder