Clover Electronics CDR 0440 manual Setup Recording Mode

NAME	Set the channel name. Press SEL button and set the channel name and select
	OK using the control button ( Ÿ ź).
COVERT	Enable/disable display of the video channel in live display mode.
BRIGHTNESS	Change the brightness value of the specified channel.(0-100)
CONTRAST	Change the contrast value of the specified channel. (0-100)
HUE	Change the hue value of the specified channel. (0-100)
SATURATION	Change the saturation value of the specified channel. (0-100)

2-3. Setup – Recording Mode

Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select RECORD icon and press SEL button to enter the setup menu item. Navigate through the menu items using the control button ( Ÿ ź) and change the value of the menu item using the control button ( Ÿ ź). To return to setup menu screen, press the ESC button.

	Figure 2.3.1. Recording mode setup screen
	Table 2.3.1. Menu items in Recording mode setup
Menu item	Description
RESOLUTION	Set the resolution to either 704x480, 704x240, or 352x240 for
	NTSC. (For PAL: 704*576/ 704*288/ 352*288)
CHANNEL	Select a channel for applying the following settings using the control
	button ( Ÿ ź). Press SEL button to change the setting value of all
	channels at once. Once you select an item, then press SEL to set value
	24