Clover Electronics CDR 0440 manual Osd

Figure 2.2.1. Display mode setup screen

	Table 2.2.1. Menu items in DISPLAY mode setup
Item	Description
OSD	Enable/disable on-screen-display.
	Select ON and press SEL button, then user are able to control OSD display
	bar up or down using the control button ( Ÿ ź).

SEQUENCE Enable/disable sequential display of video in full screen mode.

SEQ-DWELL TIME Set the dwell time of each, quad or 9 channels display in sequential display mode.(1-60seconds)

OSD CONTRAST Set the visibility level of the On Screen Display (OSD).(20-100)

CHANNEL Select a channel for applying the following settings using the control button ( Ÿ ź). Press SEL button to change the setting value of all channels at once. Once you select an item, then press SEL to set value for all channels.

(DISPLAY, BRIGHTNESS,CONTRAST,HUE,SATURATION)

23