| Figure 2.4.1. Device mode setup screen |
Table 2.4.1. Menu items in Device Setup screen | |
|
|
Item | Description |
|
|
|
|
ALARM OUT | Set the sensor, motion, and video loss for each alarm. |
|
|
|
|
PTZ | Set the PTZ camera speed, number, type and ID. |
|
|
|
|
CHANNEL | Select specified channel for motion zone setup. |
|
|
|
|
MOTION ZONE | Select either Full Zone or Partial Zone for motion sensing. |
|
|
|
|
MOTION SENSITIVITY | Set the motion sensitivity for the specified channel. |
| Control the motion sensitivity from 1 to 9. |
|
|
|
|
KEY TONE | Enable/disable key tone. |
|
|
|
|
REMOTE CONTROL ID | Select an ID of remote control. |
| 1. Select ID. |
| 2. Press the same number as ID set in DVR on a remote control. |
| 3. Then icon will be displayed on Live screen of DVR that respond to |
| the remote control. |
| The options are from 00 to 99 |
|
|
|
|
SENSOR | Select sensor NO from 1 to 4,9,16. |
|
|
|
|
TYPE | Set the type of sensor for the specified channel. Options are: OFF, |
| N/O (normal open), and N/C (normal closed). |
|
|
27
