Clover Electronics CDR 0440 manual Initialize, Preset, Tour, Autoscan, Esc, Number

INITIALIZE	Initialize the PTZ settings of the selected camera.
PRESET	Select the PRESET and press the left key (		) on the control button. Then, number
	input window will appear. Set the number (3 digits) using the number key and press
	the SEL to set the preset number for the current position.
	Press the right key ( ) on the control button and set the number (3 digits)
	to go to the preset number.
TOUR	Select the TOUR and press the right key (		) on the control button. Then, number
	input window will appear. Set the number (1 digit) using the number key and press
	SEL to make the group number work.
	Press the left key ( ) on the control button to stop tour.
	User can set the preset number in the tour group of the OSD menu.
OSD	Select the OSD to enter the menu. Control keys are Right, Left, UP, Down, Select, Far
	(REW KEY), and Near (FF KEY). Press the ESC button to return to the main menu.
	Press the PTZ button to escape from the OSD menu.
AUTOSCAN	Press the right key ( ) on the control button to start auto scan
	Press the left key ( ) on the control button to stop auto scan.
PTZ	Press the PTZ button to escape from the OSD menu.
ESC	Press the ESC button to return to the main menu.
NUMBER	Available only on the TOUR and PRESET menu.
	Available only on the OSD menu.
	: Far /	: Near

zPreset/ Tour/ OSD/ Autoscan function are available on the specific model AP8777 and PMA-200. (Select it in the NAME of PTZ setup menu)

Table 5.1.2. Description of RS-485 port

Data +

Data -

51