Clover Electronics CDR 0440 manual USA Others, Client Access, Bandwidth, Saving, Send Email

Ÿ ź).

USA

EU

OTHERS

1.OFF: Daylight saving is not set.

2.USA: Applies the USA daylight saving time.

3.EU: Applies the EU daylight saving time.

- Select the GMT AREA using the control button (

- Set the time difference with the standard time using the control button ( Ÿ ź).

4.OTHERS: If the time zone is neither USA nor E, set the start and end date of the daylight saving period.

	- Select BEGIN or END using the control button (		Ÿ ź)
	and press the SEL button.
	- Select the item using the control button (	Ÿ	ź), select
	the setting value using the control button (	Ÿ	ź) and
	press the ESC button to return to SET DATE & TIME setup
	menu.
	CAUTION:
	- Do not set the start time to 23:00 for DLS.
	- DLS can’t be applied, if the date of BEGIN and END is same.
CLIENT ACCESS	Enable/Disable remote access through network client software.
BANDWIDTH	Enable/Disable only key frame transmission. “ON” mode is favorable for use of
SAVING	low network bandwidth. Mostly, set “OFF” for normal use.
SEND EMAIL	Enable/disable the send e-mail function.(ON/OFF)

TRANSMISSION MODE: Enable sending image of the channel that triggered the alarm when an alarm event is triggered.

IP NOTIFICATION: Enable/disable sending e-mail when the IP address of your

DVR is changed.

EVENT ALARM: Enable/disable sending e-mail reports on the channel that triggered the alarm when an alarm event is triggered.

33