DR-HD100 Functions
ProHD DR-HD100 Portable DTE Recorder 59
Setting Up Master and Slave DR-HD100
Step 1: Connect the camcorder to the master DR-HD, DV I/O connector
using the supplied FireWire cable.
Step 2: Master
Power on unit.
Go to the HDD Mode menu screen and enable
USE EXT DR-HD.
Step 3: Connect the DR-HD100s through the units Computer I/O
connectors using a 6-pin to 6-pin FireWire cable.
Step 4: Slave
Power on the unit
Go to the HDD Mode screen and enable DD DRIVE.
Step 5: Master
Begin recording or playback using the master DR-HD100.
Use DD Drive Mode when Connecting to a PC
It is important to take the master DR-HD100 out of USE EXT
DR-HD mode before attempting to connect to a computer.
To do this, select DD DRIVE from the HDD Mode screen.
This returns use of the unit to hard disk mode.
STOP 1 - 001
COUNTER
00 : 00 : 00 : 00
DISK 1 000min
SYNC DISP LOCK
CONNECT
COMPUTER THEN
ENABLE BYPASS
SUCCESS
EXIT
Master DR-HD100 Slave DR-HD100
4
3
2
1