FOCUS Enhancements Mounting the DR-HD100 Macintosh, Before Connecting DR-HD100 to a Computer

DR-HD100: Using with a Computer

Mounting the DR-HD100 (Macintosh)

Step 1: Start the Mac computer and connect the DR-HD100’s COMPUTER I/O port to the computer using a standard 6-pin to 6-pin FireWire cable.

When mounted, the DR-HD100 should appear on the computer's desktop as shown below:

The DR-HD100 appears as a FAT32 volume with a PC label. Step 2: Locate the DR-HD100 on the desktop and open it up.

Step 3: Open the folder with the most recent date code (for example, “20050127-110345-01”). It should look similar to the following:

Before Connecting DR-HD100 to a Computer

If clips have been assigned to a Reel folder: perform an Organize Reels before connecting the unit to a computer.

44 ProHD DR-HD100 Portable DTE Recorder