FOCUS Enhancements DR-HD100 manual Stop Frame, Gray, No video, EXT CTL OFF, Pause, Frame, File

DR-HD100 Functions

•When Alarm is set to Off, the audio feedback for the buttons is disabled, however the alarm will still sound for low power, high heat, or low disk space conditions.

Stop Frame, Gray, No video

These settings determine the DR-HD100 video output when it is in STOP mode.

•STOP FRAME Group Default (DV only)

Displays the first frame of the clip.

•STOP GRAY (DV only)

Displays a black frame.

•STOP NO VIDEO

Video output is Off.

EXT CTL OFF, Pause, Frame, File

These options permit the use of an external device to control the DR- HD100 through the optional RS-232 cable.

RS-232 Cable Available from Focus Online Store

The RS-232 cable required to connect the DR-HD100 to an external control device is Focus part number CBLA-0113-01. It and other accessories mentioned in this manual are available at https://www.focusinfo.com/sales/ store.

•EXT CTL OFF

Use this option when connecting an external device using an RS232C cable.

•This requires the use of a a 3.5mm-to-DB9 adapter cable, plugged into DR-HD100 Control port.

In Local mode, select this item to control the DR-HD100 with the optional wired remote control unit.

The following options permit control functions to occur from a simple contact closure.

•EXT CTL PAUSE

Controls Pause and Resume during a record or playback session.

•EXT CTL FRAME DV Mode Only

Captures a single frame of video and records it to a file. Each time this function is triggered, it sequentially adds another frame to the same file until stopped.

ProHD DR-HD100 Portable DTE Recorder 65