DR-HD100 Functions
50 ProHD DR-HD100 Portable DTE Recorder
10. Reel Display
In Record or Playback modes, this item displays the particular
REEL that a clip is located in or, has been marked to. If in
PLAY FROM > REEL LIST mode, the REEL appears in
brackets for example, [REEL]. This area is blank if NO REEL
has been selected.
11. DISP information field that displays data type.
12. DISP information field that displays current data.
DISP (display) Information Fields
Use the DISP function button to display current operation
information fields 11 and 12. The data shown depends on the
mode of operation, i.e. DV or HD Recorder.
Pressing the DISP button advances the display to the next
category of information. Below is a table of the data types and
data available with DISP.
Field
Number
Data Type /
Data Description
11 COUNTER
12 Shows frame count of current video clip during record or
playback.
11 REMAINING
12 Record: counts down number of available frames
remaining, as time, on a specific disk.
Playback: displays time remaining of the current clip.
11 DV (NTSC or PAL) or HD (see note following table)
12 Record: displays the external timecode value being
generated by a camcorder or other device during a
recording session. Timecode mode must be set to EXT
TC for this function to operate, refer to “TIME CODE
EXT, REC RUN, FREE RUN, REGEN” on page66.
Playback: displays the embedded DV timecode value in
a particular track.
11 UB NTSC
12 Displays the set user bit value in a particular clip. A user
bit value must be added for this to display, refer to “UB
SET” on page68.