FOCUS Enhancements DR-HD100 manual Syncro Slave

Quickstart

Syncro Slave

CONTROL

LOCAL JVC GY-HD

-SYNCRO SLAVE AV / C

This mode is for camcorders that do not have external control or the tapeless control functionality compatible with the DR- HD100.

•Syncro Slave mode requires that a tape be in the camcorder for operation.

•The DR-HD100 must be set to Syncro Slave control mode.

•In this mode, the DR-HD100 watches the record state of the camcorder and follows its actions.

When Synchro Slave mode is entered from the menu, the Home screen appears with the Pause indicator displayed in the upper left-hand corner along with a Y that indicates that the DR-HD100 is following the camcorder’s record state.

Step 1: Verify that the DR-HD100 is in STOP mode.

Step 2: From the DR-HD100 Home screen, press the Right navigation button several times until the CONTROL screen appears:

Step 3: Use the Down navigation button to select Syncro Slave. The dash on the left side of an item indicates it is the current selection. The default value is Local.

Step 4: Press the Select navigation button.

Step 5: The beginning screen returns and a Pause indicator appears in the upper left-hand corner. Next to this symbol, is a Y indicating that DR-HD100 is now following the record state of the connected camcorder.

Step 6: Now the DR-HD100 will record at the same time the camcorder records to tape.

32 ProHD DR-HD100 Portable DTE Recorder