12 pg_W-263_EFS 4/27/06 4:59 PM Page 4

MOUNTING AND WIRING INSTRUCTIONS

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Beginning at sides and working at an angle, peel protective coating (if applicable) from face plate (A) (see fig. 1).

2.Remove retaining screws (B) from top of face plate (A) or cap nuts (B1) from face plate (A)and separate mounting plate (C) from face plate (A).

3.Position flat side of mounting plate (C) against wall at mounting location and mark outer holes (O) with a pencil.

NOTE: Mounting plate (C) must be level for fixture to hang straight.

4.Drill a 1/8 inch hole at each pencil mark then insert wall anchors (E) by gently tapping with a hammer.

NOTE: For added support, wall anchors and screws may also be mounted in additional support holes (F).

5.Thread outlet box wires through center opening in mounting plate (C).

6.Position mounting plate (C) with outer holes (O) overwall anchors (E) and secure with screws (K) or secure mounting plate (C) to outlet box (J) with outlet box screws (not included).

7.Identify color coding of fixture wires (see fig. 2).

8.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

9.Fit wire connector (G from fig. 1) over wires and twist until there is a firm connection. If wire connector (G) easily comes off, reattach and check again for a firm connection.

10.Repeat steps 7 and 8 with the white (group B from fig. 2) fixture wires and outlet box wires.

11.Partially thread green grounding screw (H) into side hole (I) on mounting plate (C) (see fig.1.)

12.Wrap ground wire from fixture around green grounding screw (H), leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (if applicable).

13.Tuckwires inside outlet box (J).

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only.

1.Replace face plate (A) over mounting plate (C) and secure with retaining screws (B) or cap nuts (B1).

2.Place glass shade(s) (L) into holder(s) (M) and secure with retaining ring(s) (N) or thumb screws (N1).

3.Install lamp(s) (Q) into socket base (R).

4.Turn power back on at circuit box.

4

Page 3 Page 5
Page 4
Image 4
Westinghouse Indoor Lighting fixture owner manual Mounting and Wiring Instructions, Fixture Assembly Instructions
Page 3 Page 5

Indoor Lighting fixture specifications

Westinghouse Indoor Lighting fixtures combine style and functionality, making them an ideal choice for any interior space. Known for their quality craftsmanship and innovative designs, these lighting solutions create ambiance while enhancing the aesthetic appeal of homes and businesses alike.

One of the standout features of Westinghouse fixtures is their diverse range of styles. Whether you're looking for contemporary elegance or rustic charm, Westinghouse offers an extensive selection that caters to various tastes and decors. From sleek chandeliers to vintage-inspired pendants, each fixture is thoughtfully designed to complement your space while providing efficient lighting.

Technologically, Westinghouse Indoor Lighting fixtures often incorporate LED technology, which not only delivers substantial energy savings but also offers longer bulb life than traditional incandescent options. LEDs produce bright, high-quality light, enhancing visibility and atmosphere within your indoor environment. Many fixtures come with the added benefit of dimmable options, allowing for personalized lighting control and versatility in mood-setting.

In addition to energy-efficient lighting, safety is a key characteristic of Westinghouse fixtures. Many products feature robust materials and are rigorously tested for quality assurance. This commitment to safety means that consumers can be confident in the durability and performance of their lighting products, even in high-traffic areas or challenging environments.

Installation is another consideration for homeowners, and Westinghouse fixtures typically come with user-friendly assembly instructions. Many designs are compatible with standard ceiling mounts, facilitating easy installation for DIY enthusiasts. Some fixtures even accommodate smart home technologies, enabling users to integrate their lighting with home automation systems for added convenience.

The versatility of Westinghouse Indoor Lighting extends to its compliance with various design trends, making it suitable for any room in the house—including kitchens, living areas, bedrooms, and hallways. The thoughtful integration of both aesthetic beauty and practicality ensures that Westinghouse fixtures meet the lighting needs of modern living spaces while adding a touch of elegance.

Overall, Westinghouse Indoor Lighting fixtures stand out in their commitment to quality, innovative technologies, and style diversity, making them a popular choice for enhancing the beauty and functionality of any indoor environment.
Top Page Image Contents