Other Connections

Other Connections

You can connect to an external TV antenna or cable TV, or a TV and audio/video receiver. The picture below shows the Travel Theater connected to an external TV antenna, TV, and audio/ video receiver.

TO AN EXTERNAL TV ANTENNA OR CABLE TV

1.Plug the supplied 75-ohm coaxial cable connector into the Travel Theater’s TV ANT. socket.

2.Connect the antenna’s or cable TV’s 75-ohm connector to the coaxial cable connector as shown

75-ohm coaxial cable connector

Ô NOTE Ô

•Position cables properly to avoid audio interference. Insert each cable firmly into the designated jack.

•If you place components above the TV, route all cables down the side of the back of the TV.

•If your antenna uses 300-ohm twin lead cables, do not coil the cables. Keep the twin lead cables away from audio/video cables.

TO A TV AND AUDIO/VIDEO RECEIVER

1.Connect the supplied audio/video cable’s yellow plug to

the Travel Theater’s VIDEO jack. Connect the yellow plug’s other end to the TV’s VIDEO IN jack. Ô

2.Connect the supplied audio/video cable’s white plug to your Travel Theater’s AUDIO L jack. Connect the other end to your TV or receiver’s Audio In L jack.

3.Connect the supplied audio/video cable’s red plug to your Travel Theater’s AUDIO R jack. Connect the other end to your TV’s or receiver’s Audio In R jack.

4.Set the Travel Theater’s A/V INPUT/OUTPUT switch to

OUTPUT.