PREPARATION
INSTALLING BATTERIES IN THE REMOTE
Your remote control requires two AAA batteries (not supplied) for power. Batteries are available at your local RadioShack store or online at www.radioshack.com.
1.Press the battery compartment cover in the direction of the arrow to slide it off.
2.Insert two AAA batteries into the battery compartment according to the polarity marks inside.
3.Replace the cover.
When the remote becomes inoperative, replace the batteries. Ô
INSTALLING THE TRAVEL THEATER
In a Vehicle
1.Make sure the Travel Theater is securely fastened in the carrying case.
2.Pull down the flap on the back of the carrying case and reattach it, aligning the velcro strip to the panel.
3.Attach one of the supplied straps to the carrying case and hang the strap over the back of the headrest.
4.Attach one strap to each loop on the bottom of each side of the carrying case.
Ô NOTE Ô
•Make sure there is a clear path between the remote and the Travel Theater so the signal is not blocked.
•Aim the remote at the Travel Theater’s Remote Sensor when you press any button on the remote.
ÔBATTERY NOTES Ô
•Dispose of old batteries promptly and properly.
•Do not burn or bury batteries.
•Use only fresh batteries of the required size and recommended type.
•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
•If you do not plan to use the remote for a month or more, remove the batteries. Batteries can leak chemicals that can damage electronic parts.
Preparation
7