Ô NOTE Ô
When you stop playing a disc, the Travel Theater remembers where you stopped. When you press PLAY gto start playing the disc again, the Travel Theater picks up where you left off unless you press STOP D, eject the disc, or turn off the Travel Theater.
Operation
5.Adjust VOLUME to a comfortable listening level.
6.To stop playing a disc, press STOP D. Ô
7.Press EJECT to remove the disc from the player.
8.To turn off the Travel Theater, press POWER º.
PROGRAMMING TV CHANNELS
1.Press POWER º.
2.Press TV/DVD/AUX on the remote or TV/AUX on the Travel Theater to select TV mode.
3.Press TV/CATV on the remote to select regular broadcast TV or cable TV (Standard Cable, HRC Cable, and IRC Cable).
4.Press AUTO MEMORY on the remote or PROG. on the Travel Theater. All available channels are searched and tuned. Channels with signals detected are automatically stored.
5.Repeatedly press SKIP/SEARCH to turn SKIP on or off.
If SKIP is on, when you use dCHANNEL e or CH+/CH– to scroll through channels, the TV stops only on channels that were stored into memory. If SKIP is off, the TV searches and stops at all available channels.
6.To manually store a TV channel, tune to that channel and press ERASE/WRITE until MANUAL MEMORY ADD appears on the screen.
To erase a channel from memory, tune to that channel and press ERASE/WRITE on the remote until MANUAL MEMORY ERASE appears on the screen.
WATCHING TV
1.Press dCHANNEL e on the Travel Theater or CH+/CH– on the remote to tune to the desired channel. You can also use the number buttons to manually enter the channel number.
2.To adjust the volume, press dVOLUME e on the Travel Theater or VOL +/ VOL– on the remote.
14