Oregon Scientific BAR383HGA Getting Started, Setting UP the Clock, Unit Location, Search

Page 4

EN

		GETTING STARTED
		SETTING UP THE CLOCK
1		Insert batteries before ﬁrst use, matching the polarity (+
1		Insert batteries before ﬁrst use, matching the polarity (+
		and -). RESET after each battery change.

		indicates the batteries are low.
2		UNIT	LOCATION
2		Main unit	Clock display area
3	6	Main unit	Clock display area
4	7	Remote sensor	Weather display area
		Remote sensor	Weather display area
	8
		NOTE Do not use rechargeable batteries. It is
		recommended that you use alkaline batteries with
5		this product for longer usage and lithium batteries for
		temperatures below freezing.

	1.	Wall Mount
	2.	°C / °F: toggle temperature display unit	SETTING UP THE SENSOR
	3.	SEARCH
			1.	Slide the rear panel off the sensor.
	4.	EU / UK switch (RTGR383HG)
			2.	Open the battery compartment cover using a small
		US TIME ZONE button (RTGR383HGA)
				screwdriver.
	5.	Battery Compartment Cover
			3.	Insert the batteries, matching the polarity (+ and -)
	6.	RESET
				as shown in the battery compartment.
	7.	Channel Switch (1 - 5)
			4.	Set the channel switch. Select a different channel
	8.	Battery compartment
				for each sensor.
			4

BAR383HG_M_EN_R9.indd 4

4/12/06 5:24:08 PM

Image 4

Contents WeatherBox Wireless Weather Station ContentsReset IntroductionClock Overview Front ViewLCD Display Clock Display AreaRemote Sensor RTGR383 / RTGR383A Weather Display AreaSetting UP the Clock Setting UP the SensorGetting Started Unit LocationClock For best resultsClock Reception BAR383HGStrong Weak No Signal Reception SignalIcon Description Clock DisplayAlarm Clock SettingsWeather Forecast Temperature and Humidity ResetPrecautions BacklightType Description Main Unit SpecificationsRemote Unit EU-DECLARATION of Conformity About Oregon ScientificFCC Statement Declaration of Conformity Declare that the product