CLOCK SETTINGS
You only need to do this if you have disabled the clock radio reception, or if you are too far from the radio signal.
To set the clock:
1.Press MODE / SNOOZE to select Clock display area and rotate MODE / SNOOZE to navigate to a clock display mode.
2.Press and hold MODE / SNOOZE for 2 seconds.
3.Rotate MODE / SNOOZE to adjust the setting.
4.Press MODE / SNOOZE to confirm and move to the next setting,
5.The settings order is: time offset, 12 / 24 hr format, hour, minute, year, month / day format, month, day and language.
NOTE If you enter + 1 in the time offset setting, this will give you your local time plus one hour. If you are in the US (BAR383HGA only) set the clock to:
0 for Pacific time | +1 for Mountain time |
+2 for Central time | +3 for Eastern time |
NOTE The language options are: English (E), French (F), German (G), Italian (I) and Spanish (S).
Alarm display mode. 
will appear.
2.Press and hold MODE / SNOOZE for 2 seconds.
3.Rotate MODE / SNOOZE to select the hour and press MODE / SNOOZE to confirm.
4.Rotate MODE / SNOOZE to select the minute and
press MODE / SNOOZE to confirm. 
indicates alarm is ON.
To toggle alarms ON / OFF:
•Press MEMORY / 
ON / OFF. 
indicates alarm is ON.
To silence the alarm:
•Press MODE / SNOOZE to silence the alarm for 8
minutes. Press MEMORY / 
ON / OFF to turn it off during the
OR
•Rotate MODE / SNOOZE or press any other key to stop the alarm and reset it to activate at the same time the next day.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of weather within a
EN
ALARM
To set the alarm:
1.Press MODE / SNOOZE to select Clock display area and rotate MODE / SNOOZE to navigate to
7
BAR383HG_M_EN_R9.indd 7
4/12/06 5:24:14 PM