EN |
|
|
|
| STRONG | WEAK | NO SIGNAL |
|
|
|
|
The reception icon will blink when it is searching for a signal. If the radio signal is weak, it can take up to 24 hours to get a valid signal reception.
RECEPTION SIGNAL
To force the sensor to search for clock signals:
•Press and hold SEARCH on the sensor for 2 seconds.
Clock area reception indicator:
ICON DESCRIPTION
Connection between main unit and sensor collecting signals
| Sensor signal reception |
|
|
| Main unit has contacted sensor; time |
| is synchronised |
| Main unit has contacted sensor; time |
| is not synchronised |
| Main unit has lost contact with sensor; |
| time is synchronised |
| Main unit has lost contact with sensor; |
| time is not synchronised |
| Main unit cannot contact sensor |
|
|
No icon | Clock reception disabled |
To toggle clock reception ON/OFF:
6
1.Press MODE / SNOOZE to select Clock display area. 
appears to indicate the area selected.
2.Press and hold SEARCH SENSOR/ RF CLOCK for two seconds to enable / disable clock reception.
To force the clock to search for the sensor and retrieve clock signals:
1.Press MODE / SNOOZE to navigate to the Weather display area.
2.Press and hold MEMORY / 
ON / OFF for 2 seconds.
ICON | DESCRIPTION |
| Main unit searching for |
| sensor |
| Sensor channel has been |
| found |
| The sensor cannot be |
| found. |
NOTE If the sensor is still not found, check the batteries, obstructions and remote unit location.
CLOCK DISPLAY
Rotate MODE / SNOOZE when clock display area is selected to choose between the following display modes:
•Clock with seconds
•Clock with weekday
•Calendar with weekday
•Time offset clock with weekday
•Alarm
BAR383HG_M_EN_R9.indd 6
4/12/06 5:24:14 PM