Olympus DS-3000 manual Setting Time/Date, Time/Date Setup Screen, Press the Stop button to end

Setting Time/Date

If you have set the time and date, information as to when an audio file is recorded is stored automatically with that file. The time and date should be set to ease audio file management tasks. The time and date setting is also needed to perform the alarm playback function (→ P.34, 35).

The hour indicator will flash automatically when you load batteries before using the recorder for the first time, or after the recorder hasn’t been used for a long time. To adjust the time, follow the steps described below.

Setting Time/Date

Time/Date Setup Screen

Hour	Minute
	Year

Month Date

1 Repeat steps 1 and 2 to set the time and date:

Time and date setup proceeds in the order of hour, minute, year, month, and date.

1Press the FF/+ button or REW/– button to set a value.

2Press the REC/SET button to accept the value.

2 Press the STOP button to end.

This completes the time setup procedure.

REC/SET	·····································································
button
(accepts a	Notes
choice and
	• If you press the STOP button during the setup
moves on to the
	operation, the clock will use the items that were
next item)

PLAY

FF/+ or REW/–

set to that point.

STOP button

STOP	INDEX
FOLDER
/MENU	ERASE

• Each press of the NEW button during setting

button

toggles the display between the 12-hour and 24-

(alters a choice)

hour system.

12